Comments on: check_hpasm

By: Monitor HP Proliant with Nagios or Op5 Monitor | An It-Slave in the digital saltmine

Thu, 08 Dec 2011 21:02:29 +0000

[...] check_hpasm can be downloaded from Console [...]

By: Ingmar Verheij – The dutch IT guy » Monitor “HP Proliant Server health” on “Citrix XenServer” with Nagios » Ingmar Verheij - The dutch IT guy

Fri, 08 Jul 2011 09:07:18 +0000

[...] Plugins can be found at Nagios Exchange, this is where I found the check check_hpasm plugin (direct link). Unfortunately this plugin does not check the ASR status.In this article I will describe how [...]

By: Daniel

Daniel — Thu, 24 Mar 2011 01:29:45 +0000

Hello again, Gerhard!

Since the comment was improperly formatted, sent it by mail.

Regards, Daniel

By: Daniel

Daniel — Thu, 24 Mar 2011 01:12:07 +0000

Hi, Gerhard!

First I want to thank you for the work you’ve done with this plugin for Nagios which interacts with both hpacucli and hpasmcli. It has been very useful for me.

Some time ago I use it with DL380 G5 and DL380 G6 smoothly.

However, I wanted to inform some differences in the output that I have observed when using the plugin with DL180 G6 servers. I’m surprised that without using “-v”, it does not display information about the RAID; This doesn’t happen with any of the models I have of DL380 series. What could be the difference?

It also seems to be a problem retrieving information on the DIMMs.

root@ss09:~# /usr/local/nagios/libexec/check_hpasm WARNING – status of all 2 dimms is n/a (please upgrade firmware), System: ‘proliant dl180 g6′, S/N: ‘MXQ03906M6′, ROM: ‘O20 08/17/2010′

This is the output of the script in “call to participate “:

root@ss09:~# ./gerhard.sh server server System : ProLiant DL180 G6 server Serial No. : MXQ03906M6 server ROM version : O20 08/17/2010 server iLo present : No server Embedded NICs : 2 server NIC1 MAC: d4:85:64:53:f1:7c server NIC2 MAC: d4:85:64:53:f1:7d server server Processor: 0 server Name : Intel Xeon server Stepping : 2 server Speed : 2400 MHz server Bus : 532 MHz server Core : 4 server Thread : 8 server Socket : 2 server Level2 Cache : 1024 KBytes server Status : Ok server server Processor: 1 server Name : Intel Xeon server Stepping : 2 server Speed : 2400 MHz server Bus : 532 MHz server Core : 4 server Thread : 8 server Socket : 1 server Level3 Cache : 12288 KBytes server Status : Ok server server Processor total : 2 server server Memory installed : 8192 MBytes server ECC supported : Yes server powersupply powersupply Power supply #1 powersupply Present : Yes powersupply Redundant: Yes powersupply Condition: Ok powersupply Hotplug : Not supported powersupply Power supply #2 powersupply Present : Yes powersupply Redundant: Yes powersupply Condition: Ok powersupply Hotplug : Not supported powersupply fans fans Fan Location Present Speed of max Redundant Partner Hot-pluggable fans — ——– ——- —– —— ——— ——- ————- fans #1 SYSTEM Yes NORMAL 55% N/A N/A No fans #2 SYSTEM Yes NORMAL 55% N/A N/A No fans #3 SYSTEM Yes NORMAL 61% N/A N/A No fans #4 SYSTEM Yes NORMAL 53% N/A N/A No fans fans temp temp Sensor Location Temp Threshold temp —— ——– —- ——— temp #1 MEMORY_BD 24C/75F 100C/212F temp #2 MEMORY_BD – 100C/212F temp #3 MEMORY_BD 24C/75F 100C/212F temp #4 MEMORY_BD – 100C/212F temp #5 MEMORY_BD – 100C/212F temp #6 MEMORY_BD – 100C/212F temp #7 MEMORY_BD 40C/104F 100C/212F temp #8 MEMORY_BD – 100C/212F temp #9 MEMORY_BD – 100C/212F temp #10 MEMORY_BD – 100C/212F temp #11 MEMORY_BD – 100C/212F temp #12 MEMORY_BD – 100C/212F temp #13 MEMORY_BD – 100C/212F temp #14 MEMORY_BD 40C/104F 100C/212F temp #15 SYSTEM_BD – 100C/212F temp #16 SYSTEM_BD – 100C/212F temp #17 AMBIENT 20C/68F 100C/212F temp #18 AMBIENT 27C/80F 100C/212F temp #19 SYSTEM_BD 17C/62F 60C/140F temp #20 SYSTEM_BD 29C/84F 100C/212F temp #21 SYSTEM_BD 24C/75F 100C/212F temp #22 SYSTEM_BD 24C/75F 100C/212F temp #23 SYSTEM_BD 24C/75F 100C/212F temp #24 SYSTEM_BD 22C/71F 100C/212F temp #25 SYSTEM_BD 22C/71F 100C/212F temp #26 SYSTEM_BD 21C/69F 100C/212F temp #27 SYSTEM_BD 21C/69F 100C/212F temp #28 SYSTEM_BD 24C/75F 100C/212F temp #29 SYSTEM_BD 23C/73F 100C/212F temp #30 SYSTEM_BD 24C/75F 100C/212F temp #31 SYSTEM_BD 27C/80F 100C/212F temp #32 SYSTEM_BD 27C/80F 100C/212F temp #33 SYSTEM_BD 20C/68F 100C/212F temp #34 SYSTEM_BD 21C/69F 100C/212F temp #35 SYSTEM_BD 50C/122F 120C/248F temp temp dimm dimm Cartridge #: 0 dimm Processor #: 1 dimm Module #: 2 dimm Present: Yes dimm Form Factor: fh dimm Memory Type: 5h dimm Size: 4096 MB dimm Speed: 1333 MHz dimm Status: N/A dimm dimm Cartridge #: 0 dimm Processor #: 1 dimm Module #: 4 dimm Present: Yes dimm Form Factor: fh dimm Memory Type: 5h dimm Size: 4096 MB dimm Speed: 1333 MHz dimm Status: N/A dimm dimm config config Smart Array P410 in Slot 1 (sn: PACCRID103409RW)config config array A (SATA, Unused Space: 0 MB)config config logicaldrive 1 (5.5 TB, RAID 5, OK)config config physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 1TB, OK)config physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 1TB, OK)config physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 1TB, OK)config physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 1TB, OK)config physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 1TB, OK)config physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 1TB, OK)config physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 1TB, OK)config physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 1TB, OK, spare)config status status Smart Array P410 in Slot 1status Controller Status: OKstatus Cache Status: OKstatus Battery/Capacitor Status: OKstatus status root@ss09:~#

Thanks in advance for your reply.

Regards, Daniel

By: lausser

lausser — Fri, 18 Mar 2011 18:24:00 +0000

You just can’t do that.

By: Zyth

Zyth — Fri, 18 Mar 2011 15:01:10 +0000

First off, thanks for a brilliant plugin.

I have a (potensially) stupid question I hope someone can answer me though; How do you run check_hpasm in local mode through NSclient on a Windows box, without installing Perl?

By: baq

baq — Fri, 18 Mar 2011 08:55:45 +0000

I was install hpasm, but when I started deamon : (Debian6, amd86_64)

Starting Proliant System Health Monitor (hpasmd): [ SUCCESS ]

Starting Foundation Agents (cmafdtn): cmathreshd cmahostd cmapeerd Starting Threshold agent (cmathreshd): [ SUCCESS ]

Starting Host agent (cmahostd): [ SUCCESS ]

Starting SNMP Peer (cmapeerd): [ SUCCESS ]

Starting Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd cpqriisd cmasm2d cmarackd Starting Standard Equipment agent (cmastdeqd): [ SUCCESS ]

Starting Health agent (cmahealthd): [ SUCCESS ]

Starting Performance agent (cmaperfd): [ SUCCESS ]

cpqriisd requires hp_ilo. [ SUCCESS ]

Starting RIB agent (cmasm2d): [ SUCCESS ]

cpqriisd requires hp_ilo. [ SUCCESS ]

Starting Rack agent (cmarackd): [ SUCCESS ]

Starting Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided cmascsid cmasasd Starting Storage Event Logger (cmaeventd): [ SUCCESS ]

Starting IDA agent (cmaidad): [ SUCCESS ]

Starting FCA agent (cmafcad): [ SUCCESS ]

Starting IDE agent (cmaided): [ SUCCESS ]

FATAL: Module sg not found. Starting SCSI agent (cmascsid): [ SUCCESS ]

Starting SAS agent (cmasasd): [ SUCCESS ]

Starting NIC Agents (cmanic): All agents Starting NIC Agent Daemon (cmanicd): Unable to determine if cmanic successfully started

The binary "/opt/compaq/hpasmd/bin/hpasmxld" depends on "linux-vdso.so.1". The binary "/opt/compaq/hpasmd/bin/hpasmxld" depends on "/usr/lib/libhpasmintrfc64.so.2". The binary "/opt/compaq/hpasmd/bin/hpasmxld" depends on "/lib/libc.so.6". The binary "/sbin/hpbootcfg" depends on "linux-vdso.so.1". The binary "/sbin/hpbootcfg" depends on "/usr/lib/libhpasmintrfc64.so.2". The binary "/sbin/hpbootcfg" depends on "/usr/lib/libhpev64.so.1". The binary "/sbin/hpbootcfg" depends on "/lib/libc.so.6". hpasm: Server Management is not fully enabled touch: cannot touch `/var/lock/subsys/hpasm': No such file or directory

By: lausser

lausser — Thu, 17 Mar 2011 20:08:57 +0000

I have no idea. You must ask HP. I doubt Debian is certified at all.

By: baq

baq — Thu, 17 Mar 2011 18:44:52 +0000

I dont install hpasm deamon. where can I download it for Debian6 ?

By: baq

baq — Thu, 17 Mar 2011 17:58:06 +0000

@lausser, I dont now how resolve this problem.